Susan Ewart Posted June 30 Share Posted June 30 12 minutes ago, Rene Marker said: Pssttttttt..... I have a template for Canada with the individual provinces on it. It is still available at The Lily Pad. The designer also did one for the US and I used it for a layout I did in April documenting every state I have visited in the first 68 years of my life. Since I can now start working on my travel dreams, I will continue to fill it in the next few years. I'll check that out, thank you. 1 Link to comment Share on other sites More sharing options...
Corrie Kinkel Posted June 30 Share Posted June 30 15 hours ago, Susan Ewart said: I'll check that out, thank you. Me too, thanks Rene and I'm glad you can make travel plans once more! 1 Link to comment Share on other sites More sharing options...
Donna Sillia Posted June 30 Share Posted June 30 Copying a chicken from CF 6 1 Link to comment Share on other sites More sharing options...
Cassel Posted June 30 Author Share Posted June 30 38 minutes ago, Donna Sillia said: Copying a chicken from CF That's a lot of vectors! Definitely a good practice! 1 3 Link to comment Share on other sites More sharing options...
Daniel Hess Posted July 1 Share Posted July 1 (edited) @Mary Solaas @Corrie Kinkel You can get the pspshape file here: http://www.toroscope.com/files/USA-MAP.zip. I warn you...it wasn't done as elegantly as it could have been...if you load it up and look at the vectors there are ALOT of objects throughout the thing and I wasn't completely methodical i.e. start in upper left and work all the way across then down some and again etc. I kind of jumped around until I had all the borders. PS...remember Carole's lesson on file types regarding this...just unzip and put the pspshape file into documents/CorelPSP/Preset Shapes folder. Edited July 1 by Daniel Hess 3 Link to comment Share on other sites More sharing options...
Ann Seeber Posted July 1 Share Posted July 1 34 minutes ago, Daniel Hess said: @Mary Solaas @Corrie Kinkel You can get the pspshape file here: http://www.toroscope.com/files/USA-MAP.zip. I warn you...it wasn't done as elegantly as it could have been...if you load it up and look at the vectors there are ALOT of objects throughout the thing and I wasn't completely methodical i.e. start in upper left and work all the way across then down some and again etc. I kind of jumped around until I had all the borders. PS...remember Carole's lesson on file types regarding this...just unzip and put the pspshape file into documents/CorelPSP/Preset Shapes folder. @Daniel Hess When I clicked on your link, this is what I got... Link to comment Share on other sites More sharing options...
Daniel Hess Posted July 1 Share Posted July 1 (edited) @Ann Seeber @Mary Solaas @Corrie Kinkel OK. Need to lose the period that ended up in the link at the end. Let me try again. http://www.toroscope.com/files/USA-MAP.zip Better to copy and paste the link in the address bar. When I tried on my reply, it gave me something about unsecure download. Should work fine just typing it in or pasting it. OR BEST...right click then "Save link as" from this post. Edited July 1 by Daniel Hess 1 1 Link to comment Share on other sites More sharing options...
Ann Seeber Posted July 1 Share Posted July 1 19 minutes ago, Daniel Hess said: @Ann Seeber @Mary Solaas @Corrie Kinkel OK. Need to lose the period that ended up in the link at the end. Let me try again. http://www.toroscope.com/files/USA-MAP.zip Better to copy and paste the link in the address bar. When I tried on my reply, it gave me something about unsecure download. Should work fine just typing it in or pasting it. OR BEST...right click then "Save link as" from this post. Got it! Thank you. I did have to copy/paste as the link also gave me the "unsecure" flag. Thanks again, Daniel. 1 Link to comment Share on other sites More sharing options...
Corrie Kinkel Posted July 1 Share Posted July 1 3 hours ago, Daniel Hess said: @Ann Seeber @Mary Solaas @Corrie Kinkel OK. Need to lose the period that ended up in the link at the end. Let me try again. http://www.toroscope.com/files/USA-MAP.zip Better to copy and paste the link in the address bar. When I tried on my reply, it gave me something about unsecure download. Should work fine just typing it in or pasting it. OR BEST...right click then "Save link as" from this post. Daniel thank you, I got it and by seeing how Ann did it, I just typed the link in the address bar. This way I didn't get a message about unsecure download and my anti virus software is usually very picky. Clearly there are many ways to do things......... 1 Link to comment Share on other sites More sharing options...
Ann Seeber Posted July 1 Share Posted July 1 (edited) 7 hours ago, Daniel Hess said: @Mary Solaas @Corrie Kinkel You can get the pspshape file here: http://www.toroscope.com/files/USA-MAP.zip. I warn you...it wasn't done as elegantly as it could have been...if you load it up and look at the vectors there are ALOT of objects throughout the thing and I wasn't completely methodical i.e. start in upper left and work all the way across then down some and again etc. I kind of jumped around until I had all the borders. PS...remember Carole's lesson on file types regarding this...just unzip and put the pspshape file into documents/CorelPSP/Preset Shapes folder. @Daniel Hess I put the file in the Preset Shapes folder as you suggested but I don't see how to bring the shapes up. They don't show up in my PSP 2023 Preset Shapes. I can see the ones I put there from the class but not your map. Do you have a suggestion? Edited July 1 by Ann Seeber 2 Link to comment Share on other sites More sharing options...
Daniel Hess Posted July 1 Share Posted July 1 @Ann Seeber Maybe search the "documents" folder for USA-MAP.PspShape and see where it landed. Apparently NOT in the documents/Corel Paintshop Pro/2023/Preset Shapes folder. ??? I don't have 2023...I didn't see anything that tripped my trigger better than 2022 but am ANXIOUSLY awaiting to see what 2024 is going to bring. I figure the best of 2023 will also be included in that. Punctuation is KEY in the file names and folder names...you miss one capital letter and it will give you nothing. 2 Link to comment Share on other sites More sharing options...
Ann Seeber Posted July 1 Share Posted July 1 (edited) 14 minutes ago, Daniel Hess said: @Ann Seeber Maybe search the "documents" folder for USA-MAP.PspShape and see where it landed. Apparently NOT in the documents/Corel Paintshop Pro/2023/Preset Shapes folder. ??? I don't have 2023...I didn't see anything that tripped my trigger better than 2022 but am ANXIOUSLY awaiting to see what 2024 is going to bring. I figure the best of 2023 will also be included in that. Punctuation is KEY in the file names and folder names...you miss one capital letter and it will give you nothing. @Daniel Hess It is there in my PSP2023 Preset Shapes folder. If it might not work in 2023 I can move it to 2022 ... I think I'll try that. OK, that worked! Thanks Daniel. Edited July 1 by Ann Seeber 2 Link to comment Share on other sites More sharing options...
Donna Sillia Posted July 1 Share Posted July 1 Creative Fabrica has a font called 212 US Dings that includes each state and a US map. 2 2 Link to comment Share on other sites More sharing options...
Susan Ewart Posted July 1 Share Posted July 1 2 hours ago, Daniel Hess said: @Ann Seeber Maybe search the "documents" folder for USA-MAP.PspShape and see where it landed. Apparently NOT in the documents/Corel Paintshop Pro/2023/Preset Shapes folder. ??? I don't have 2023...I didn't see anything that tripped my trigger better than 2022 but am ANXIOUSLY awaiting to see what 2024 is going to bring. I figure the best of 2023 will also be included in that. Punctuation is KEY in the file names and folder names...you miss one capital letter and it will give you nothing. Thank you for sharing your hard work Daniel, I got it too. 2 Link to comment Share on other sites More sharing options...
Susan Ewart Posted July 1 Share Posted July 1 23 hours ago, Donna Sillia said: Copying a chicken from CF I like your version better, nicer design, especially the wing and tail and chest area. 2 1 1 Link to comment Share on other sites More sharing options...
Donna Sillia Posted July 1 Share Posted July 1 59 minutes ago, Susan Ewart said: I like your version better, nicer design, especially the wing and tail and chest area. Thank you, Susan, I forgot to add that I used Filter Forge for the tail feathers and the chest area. I also used a FF cartoon effect to make the tail feathers less realistic. I had so much fun that I have others from this CF download called littlest pet shop. 1 1 Link to comment Share on other sites More sharing options...
Mary Solaas Posted July 2 Share Posted July 2 12 hours ago, Daniel Hess said: @Ann Seeber @Mary Solaas @Corrie Kinkel OK. Need to lose the period that ended up in the link at the end. Let me try again. http://www.toroscope.com/files/USA-MAP.zip Better to copy and paste the link in the address bar. When I tried on my reply, it gave me something about unsecure download. Should work fine just typing it in or pasting it. OR BEST...right click then "Save link as" from this post. @Daniel Hess thank you. 1 Link to comment Share on other sites More sharing options...
Cindy Sheets Posted July 2 Share Posted July 2 Okay, just finished with all the videos. Mind blown! My head is full of ideas but I can't practice yet so I have on a 😞. I think I will have to take this class another three times before I can call it good (no, I can't afford Diamond Membership at this time as I am on disability). The good news is that my home sold and I picture a day when I will be able to take time to work on things again. 5 Link to comment Share on other sites More sharing options...
Jeni Simpson Posted July 2 Share Posted July 2 1 minute ago, Cindy Sheets said: Okay, just finished with all the videos. Mind blown! My head is full of ideas but I can't practice yet so I have on a 😞. I think I will have to take this class another three times before I can call it good (no, I can't afford Diamond Membership at this time as I am on disability). The good news is that my home sold and I picture a day when I will be able to take time to work on things again. Cindy, I plan on doing the same, I want to join the Diamond Membership, and I am on a single income and bills get too high! However, I hope to do a monthly membership every so often when I can, because I think it is well worth the money. 3 Link to comment Share on other sites More sharing options...
Susan Ewart Posted July 2 Share Posted July 2 51 minutes ago, Jeni Simpson said: Cindy, I plan on doing the same, I want to join the Diamond Membership, and I am on a single income and bills get too high! However, I hope to do a monthly membership every so often when I can, because I think it is well worth the money. I started by buying one month at a time. It is insane the cost of living now. I've certainly changed my spending habits in the last several years. Retirement is on the horizon and how to make ends meet when that time comes is more on my mind now than ever before. 1 1 2 Link to comment Share on other sites More sharing options...
Jeni Simpson Posted July 2 Share Posted July 2 2 hours ago, Susan Ewart said: I started by buying one month at a time. It is insane the cost of living now. I've certainly changed my spending habits in the last several years. Retirement is on the horizon and how to make ends meet when that time comes is more on my mind now than ever before. Thank you, Susan, I am thinking of doing much the same. I believe the classes and tutorials are excellent, and I have learned so much in a short time. I downloaded a few tutorials and started doing the Labs and I need to go back and do more of that hands-on work. I plan on continuing the workshops Carole opens up to us, there is even more learning with the extra help given to each participant, not just by Carole, but by everyone doing that same workshop, too. 3 Link to comment Share on other sites More sharing options...
Cristina Posted July 4 Share Posted July 4 On 6/21/2024 at 4:49 AM, Cassel said: @Cristina Those multiple checks will become second nature. How are you getting an outline through both sides of the mug? If you make a cutout, it should not show a line through the handle. I have no idea right now... 🤔 I have to go back and do it again to see what I did. But there are always so many things to do after a trip. Probably next week, I will be able to work with PSP. 3 Link to comment Share on other sites More sharing options...
Cristina Posted July 10 Share Posted July 10 I checked the file and still don't know how/what I did, but definitely not correct. So, I redid the lesson with the same graphic, and here is the new one. 7 Link to comment Share on other sites More sharing options...
Cristina Posted July 10 Share Posted July 10 (edited) I have worked with the lessons separately, but I will post here just one file that includes all the 3 other techniques (Text on a Path - Vector Tube Script - Cut a Vector Object) Text on a Path - I also added the "Text on a Circle" technique. I used Instant Effect Pen & Ink for the photo and Layer Styles Outer Glow. Vector Tube Script - I used cass-Pearls Tube. Cut a Vector Object—I drew a rectangle frame and cut it into 3 parts. I wanted to try something different so that I could choose a different color for every section of the frame. I cut the vector object in the original layer and duplicated it three times, deleting the unnecessary vector parts in each layer. Then, just ran the script as shown in the video. As always, this is a great workshop! Edited July 10 by Cristina 7 Link to comment Share on other sites More sharing options...
Corrie Kinkel Posted July 10 Share Posted July 10 5 hours ago, Cristina said: I have worked with the lessons separately, but I will post here just one file that includes all the 3 other techniques (Text on a Path - Vector Tube Script - Cut a Vector Object) Text on a Path - I also added the "Text on a Circle" technique. I used Instant Effect Pen & Ink for the photo and Layer Styles Outer Glow. Vector Tube Script - I used cass-Pearls Tube. Cut a Vector Object—I drew a rectangle frame and cut it into 3 parts. I wanted to try something different so that I could choose a different color for every section of the frame. I cut the vector object in the original layer and duplicated it three times, deleting the unnecessary vector parts in each layer. Then, just ran the script as shown in the video. As always, this is a great workshop! Cristina, great that you have competed the vector workshop more or less on your own with this results. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now