Jump to content

Recommended Posts

Posted
Just now, Corrie Kinkel said:

I have the same problem, I don't see the Haze Removal and I have the same version number as Donna

Can it be that I do not have the Ultra version and I tried with a photo open and that didn't alter anything.

  • Like 2
Posted (edited)
10 minutes ago, Cassel said:

That should be the correct one.

You don't see the Haze Removal just a few commands below the Add/Remove Noise command?

Blur is under Add/Remove Noise. I have 2023 Ultimate

Edited by Donna Sillia
Posted

I definively don't see it, it simply isn't there. Choosing layers in the layers palette functions as it should and the bounding box around the freehand selection tool is gone too, so that's positive!

 

  • Like 1
Posted
11 minutes ago, Cassel said:

This is what I have:

HazeRemoval.jpg

Carole, how did you get that shot? I had to resort to my iPhone and send the photo to myself via Messenger! :classic_rolleyes: Maybe you have an easier technique?

  • Like 1
Posted
3 minutes ago, Ann Seeber said:

Carole, how did you get that shot? I had to resort to my iPhone and send the photo to myself via Messenger! :classic_rolleyes: Maybe you have an easier technique?

Ann I took a screenshot of my pc with paintshop open and then selected a part of that screenshot for posting here!

 

  • Like 1
Posted

For those who don't see the Haze removal...

  • did you restart your PSP?
  • did you reload a workspace? now or previously?
  • do you have the pro or ultimate? I don't think it matters but I can ask.
  • Like 1
Posted

There is one sales pitch Corel uses where they compare all the versions. Some have a check mark, some don’t. You know the page.

one of the things that has check marks for 2021, 2022, 2022 Pro, 2022 Ultimate, 2023, 2023 Pro, etc, is this passage:

Screenshot tools — Capture and edit screenshots all in one place.”

Carole, do you know what they’re talking about?  I just do as Corrie does with print screen. But if there is a better, faster, more elegant way, I want to know!

 

  • Like 1
Posted
6 minutes ago, Suzy said:

Ann, did you recently buy 2023, or did you do the free upgrade? 

Yes, I won it recently in the Campus (in June, I think) and just did the patch that Carole posted. This is my first version of 2023. I never bought it previously because there were so many bugs flying around it. *swat! ?

  • Like 1
  • Haha 1
Posted
17 minutes ago, Cassel said:

For those who don't see the Haze removal...

  • did you restart your PSP?
  • did you reload a workspace? now or previously?
  • do you have the pro or ultimate? I don't think it matters but I can ask.

I dont have it either and have done the patch and did restart on the computer (last night).  I just reloaded the workspace and still dont have it.  I have ultimate 2023. I also have version 25.2.0.58 x64

  • Like 1
Posted
45 minutes ago, Corrie Kinkel said:

Ann I took a screenshot of my pc with paintshop open and then selected a part of that screenshot for posting here!

 

Thanks Corrie; I finally figured it out.

haze removal menu item.jpg

  • Like 1
Posted

I did change my workspace a couple of days ago to dsAug2023. However, when I looked under View Toolbars, it shows ds72022. How can I change this to my Aug workspace? I tried unchecking it and reloading the Aug workspace, but it keeps coming back.

Screenshot 2023-08-10 142410.jpg

  • Like 1
Posted
30 minutes ago, Suzy said:

There is one sales pitch Corel uses where they compare all the versions. Some have a check mark, some don’t. You know the page.

one of the things that has check marks for 2021, 2022, 2022 Pro, 2022 Ultimate, 2023, 2023 Pro, etc, is this passage:

Screenshot tools — Capture and edit screenshots all in one place.”

Carole, do you know what they’re talking about?  I just do as Corrie does with print screen. But if there is a better, faster, more elegant way, I want to know!

Their new screenshot tools are no longer new. I had an article on that is 5 years old, HERE.

Personally, I tend to use the PrintScreen + PSP9 (which is always open) unless i need the cursor since the PrintScreen does not include the cursor.

  • Like 1
Posted
1 minute ago, Donna Sillia said:

did change my workspace a couple of days ago to dsAug2023. However, when I looked under View Toolbars, it shows ds72022. How can I change this to my Aug workspace? I tried unchecking it and reloading the Aug workspace, but it keeps coming back.

Workspaces and toolbars are different.

You created a toolbar (apparently) and that can be added/removed through View > Customize > Toolbar

The workspaces would be available under File > Workspace and there you should see the default Photography, Essential, and Complete for the Pro version plus the Sea-to-Sky for the Ultimate version, and whatever other workspace you would have created.

  • Like 1
  • Thanks 1
Posted
10 minutes ago, Cassel said:

Workspaces and toolbars are different.

You created a toolbar (apparently) and that can be added/removed through View > Customize > Toolbar

The workspaces would be available under File > Workspace and there you should see the default Photography, Essential, and Complete for the Pro version plus the Sea-to-Sky for the Ultimate version, and whatever other workspace you would have created.

Yeah, success!

  • Like 1
Posted

If you don't see the Haze Removal, you should be able to add it from the Customize menu.

I am not sure why it would not appear in the first place. 

  • Like 1
  • Love 1
Posted

When i go View>Customize<Commands tab and find adjust in the dropdown I can find Haze Removal in the commands section.  From there I click and hold on the HAZE Removal and dragged it up tothe Adjust word on the top of the screen and it dropped down and I put in in place.

 

I didnt do this on my saved workspace incase it all went south.  

Capture.JPG

  • Like 1
Posted
16 minutes ago, Cassel said:

If you don't see the Haze Removal, you should be able to add it from the Customize menu.

I am not sure why it would not appear in the first place. 

I just tried it before I saw your post, it worked for me.  Going to try it in my saved workspace .  thank you

  • Like 1
Posted
13 minutes ago, Susan Ewart said:

I just tried it before I saw your post, it worked for me.  Going to try it in my saved workspace .  thank you

Thank you Susan, this worked for me too and in my saved workspace!

  • Like 2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...